Slot channel SRD50
» Download product sheet (pdf)
| Channel model | P [mm] | AT 12) [mm] | Fall | ET 13) [mm] |
| SRD-50 | 50 | min. 55 | 0,6 % | max. 106 |
Calculation ET: AT + L1 x 0,006 [AT; ET; L1 in mm]
Material: 1.4301 (AISI 304), 1.4571 (AISI 316 Ti)
Channel drain – vertical – welded – single-part
| Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H [mm] |
| RBE DRS-100-E-S | 100 | 110 | 246 | 218 | 300 |
 |
|||||
Channel drain – horizontal – welded – single-part
| Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H [mm] | HRS [mm] |
| RBE H-100-E-W | 100 | 110 | 246 | 218 | 300 | 289 |
 |
||||||
Channel drain – vertical – two-part
| Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H [mm] |
| RBE H-100-E-S | 100 | 110 | 246 | 218 | 178 |
 |
|||||
Channel drain – horizontal – two-part
| Model | DN | Ø d [mm] | diag. B [mm] | Ø D [mm] | H [mm] | HRS [mm] |
| RBE H-100-E-W | 100 | 110 | 246 | 218 | 178 | 167 |
 |
||||||
6) further nominal widths on request
12) please take AT from the module system
13) please take ET from the module system
Description for use in tenders:
Module slot channel, Model SRD50, inlet slot width 20 mm with spacers every 300 mm. Internally mounted edge protection reinforced with continuous stainless steel Z-profile. Adjustable height dowel installation feet every 1,000 mm fixed in horizontal arm of the Z-profile. 50 mm profile width and fall 0.6 %. Channel available flanged, with welded channel drain. Surface grain blasted.
Product tenders
We post our product tenders on Heinze, the information platform for construction products.
» Product tenders on heinze.de
